Work-free electrical outlets: the new solution that replaces traditional outlets and simplifies renovation work
Between a lack of sockets and cables lying around, everyday life can be a little irritating. A ”
Adding a plug without breaking: the promise of a new product
The idea is very appealing, as it eliminates the need for wall cut-outs. Instead, a module is mounted on the wall and connected to an existing power supply. The principle creates a point of use, like an additional electrical outlet. What’s more, installation takes just a few minutes with simple tools.
The concept is for a surface-mounted electrical outlet, installed without a cutout. In this way, the cable runs in plain sight, then terminates in a secure base. This reduces dust and minimizes
Several formats are available, from the simple block to the USB version. In addition, some socket-outlet models feature a switch or usage meter. You gain flexibility without affecting the distribution of the home. However, usage dictates the limits, especially with power-hungry appliances.
“No heavy work doesn’t mean no rules: safety comes first.
Operation and limits
In practice, the module draws current from an already protected line. First, you need to identify the circuit, then check its rating. A
This system does not increase the power available on the panel. So plugging in a powerful radiator remains a bad idea. However, a charger, a lamp or a vacuum cleaner are all suitable for an added socket. In short, adapt the use to the capacity of the circuit.
- Check presence of earth and condition of terminal block.
- Switch off the power supply at the main circuit breaker before taking any action.
- Choose a certified, resistant surface housing.
- Provide a chute of the correct width and height.
- Test tension and continuity after installation.
Fastening is important, as it guarantees long-term stability. For this reason, it’s better to use suitable plugs than simple adhesive. Next, check that the terminals are tight and grounded. As a result, the new electrical outlet must remain stable and secure.
Standards and safety not to be overlooked
The basic rule is NF C 15-100. This means that every electrical socket connected must be on a protected circuit. What’s more, the earth must be present and tested. On the other hand, you must avoid any haphazard connections or concealed dominoes.
In a shower room, the choice of location makes all the difference. So, at the very least, respect the volume and IP44 rating. Also, place the socket at a distance from the water point. If the plan is unclear, ask for advice.
The length of the route influences the voltage drop. So keep the route short and limit sharp turns. Next, measure the voltage at no load and then at full load. In short, the future electrical outlet must be supplied with a stable 230 V.
Fast, legal alternatives
The wall-mounted socket-outlet with screw offers a clean result. You can transform an existing outlet into a double or triple outlet. What’s more, no additional wiring is required. On the other hand, the power remains the same on the circuit.
Another option is a connected socket for cable-free control. A trunking extension cord may also suffice in an office. But don’t forget passageways, doors and traffic areas. So secure the path to avoid falls.
Choosing the right solution and budget
Start with the intended use, then list the appliances. This way, you can size each electrical outlet according to the expected load. Then check space, height and traffic flow. Anticipate future additions to avoid the need for further work.
In terms of cost, the surface-mounted solution is often affordable. However, the quality of the materials used can affect both the cost and the duration of the project. Therefore, choose certified enclosures, trunking and screws. Also, select an electrical outlet with a flap if the area is exposed.
Installation time can often be squeezed into a short morning. So planning is more important than the drilling phase. In short, get the tools ready and switch off the main power. Then test the new electrical socket before putting it away.
When in doubt, call a certified electrician. This way, you can validate the wiring, earthing and protection. On the other hand, avoid temporary installations that last for years. If necessary, have the conformity of the added electrical outlet confirmed.
No comments
Post a comment
Always participate in accordance with the law and with respect for others.